LEDpower+ Deluxe Kit 1-2 is for one LED device. This kit is designed for use in a 2 AAA battery device. (For a 3 battery device, click the link above.) You can easily expand it by purchasing additional power injectors, dummy batteries and cables. You can also purchase the 2 LED and 4 LED kits. The 3.0vdc power supply puts out 1000mAh. LED lanterns and candles use anywhere from 20ma to 100ma, though typically at the lower end. The power supply will officially light 4 devices but may light 8 or more. The cables/connectors are 5.5mm x 2.1mm barrel plugs which is the same as those used for CCTV camera power supplies. Depending upon your placement of devices, it might make more sense to plug in power supplies near them rather than running all the cables from one power supply.
The Deluxe Kit 1-2 includes the following: Plug-in 3.0vdc power supply w/44" cable, power injecter with 24" cable, 1 dummy battery, a 6" file, 6" of double sided adhesive foam tape and a complete instruction guide. The product includes a 90 day manufacturer's warranty. The product should work for many years and has been tested for many hundreds of hours. Appearance of power injectors and dummy batteries may vary. Appearance of power injectors and dummy batteries may vary.
A Note from Dan F. Schramm, CEO- Thanks for visiting. I came up with this idea because I have a number of LED lanterns and candles in my medieval styled bedroom. Replacing AAA batteries gets to be rather expensive. Frankly, I like to have things setup in advance to impress when I go out in case I bring a date home. I like my place to have a certain atmosphere. I have real candles too but it is certainly not safe to have them burning unattended. Leaving the battery powered lanterns and candles running for hours is a sure way to run through lots of batteries. Usually when I come home some of the batteries have died and that rather ruins the effect. When I leave them off for a period of time, some of the batteries go dead anyway. Our LEDpower+ product is the most reliable and economic way to make use of these devices without worrying about constant battery replacement. It also saves a lot of time without having to go purchase and replace batteries regularly.
In the support pages you will see that the wire is thin enough that you can close the battery compartment door over it. However, it is better to file a small notch into the edge where the wire comes out, which is why we include a small file. The printed instruction guide and support pages give detailed instructions. In addition, we include double-sided black foam tape to attach the wire to a corner of the lantern (if you have the lantern hanging) or otherwise secure the wire so it is not obvious and the installation is kept neat. We include 6 inches of tape. Simply use a pair of scissors to cut the desired lengths. The 24" cable lead allows you to have the connector away from the device and conceal it for a better appearance. Exact appearance of power injector and dummy batteries may vary. Exact style of file will vary.
WARNING: We do not recommend using actual batteries in addition to the power injector or in place of the dummy batteries. Doing so voids the warranty and Blue Planet is not responsible for any hazards that may result. Dead batteries will not usually pass the current anyway rendering the system non-functional.
PAY with PayPal
UPC: 634385401987
LEDpower+ Deluxe Kit 2-2 is for 2 LED devices. This kit is designed for use in a 2 AAA battery device. (For a 3 battery device, click the link above.) You can easily expand it by purchasing additional power injectors, dummy batteries and cables. You can also purchase the 2 LED and 4 LED kits. The 3.0vdc power supply puts out 1000mAh. LED lanterns and candles use anywhere from 20ma to 100ma, though typically at the lower end. The power supply will officially light 4 devices but may light 8 or more. The cables/connectors are 5.5mm x 2.1mm barrel plugs which is the same as those used for CCTV camera power supplies. Depending upon your placement of devices, it might make more sense to plug in power supplies near them rather than running all the cables from one power supply.
Kit 2-2 includes a 3.0vdc 1000mAh power supply, 2 power injectors, 2 dummy batteries, a 2-way power splitter, one extension cable 3 meter (10 ft.), 12" of double-sided adhesive foam tape, a 6" file and the instruction guide. Appearance of power injectors and dummy batteries may vary.
Kit Price: $35.95 including shipping.
UPC: 634385401055
LEDpower+ Deluxe Kit 4-2 is for 4 LED devices. This kit is designed for use in a 2 AAA battery device. (For a 3 battery device, click the link above.) You can easily expand it by purchasing additional power injectors, dummy batteries and cables. You can also purchase the 1 LED and 2 LED kits. The 3.0vdc power supply puts out 1000mAh. LED lanterns and candles use anywhere from 20ma to 100ma, though typically at the lower end. The power supply will officially light 4 devices but may light 8 or more. The cables/connectors are 5.5mm x 2.1mm barrel plugs which is the same as those used for CCTV camera power supplies. Depending upon your placement of devices, it might make more sense to plug in power supplies near them rather than running all the cables from one power supply.
Kit 4-2 includes a 3.0vdc 1000 mAh power supply, 4 power injectors, 4 dummy batteries, a 4-way power splitter and three extension cables, each 3 meters (10 ft.) . It includes 24" of double-sided adhesive foam tape, a 6" file and the instruction guide. Appearance of power injectors and dummy batteries may vary.
Kit Price: $49.95 including shipping. All kits and parts include a 90 day manufacturer's warranty and a 14 day refund return policy.
PAY with PayPal
UPC: 634385401529
Home
Contact
Blue Planet Security Corp.
Blue Planet Trailer Corp.